LUMA-NET
400CP REMOTE CONTROL PANEL
INSTALLATION AND OPERATION GUIDE
Software Revision 3.00, Version C
INTRODUCTION
The NSI 400CP represents a key part of a state of the art, total lighting control system. Combined with NSI
dimmers and optionally, an NSI memory control console, a totally integrated system is achieved.
The 400CP can automatically take control of up to 512 dimmer channels. Control is automatically passed between
400CP’s and the memory control console as desired. The 400CP is exceptionally easy to operate and features 4
zone control with programmable fade times. Remote lockout capability is also included. Installation is a snap
with the simple 4 wire digital connection required.
IMPORTANT
•
Programming differs from older 400CP panels (prior to release 3.00), please read instructions.
•
400CP control panels with software release 3.00 and higher are not directly compatible and will not
operate with older 400CP panels with software prior to release 3.00. Contact dealer or factory for
modifications if necessary.
•
NSI dimming systems used with these release 3.00 panels require the following software releases:
2408CD, 2408CR, 2404CD
release 2.30 and above.
DDS 8600/8800/9600/9800
release 1.30 and above.
*
DDS 6000
release 1.30 and above.
*
DDS 5300/5500/5600
release 1.30 and above.
*
*
Optional interface kit required for these units.
