192
range is 200 to 1468 bytes with default being
1400 bytes
Port Configuration
Port
The port number for which the configuration
below applies
Flow Sampler
Enabled
Enables/disables flow sampling on this port
Flow Sampler
Sampling
Rate
Thestatistical sampling rate for packet
sampling. Set to N to sample on average
1/Nth of the packets transmitted/received on
the port. Not all sampling rates are
achievable. If an unsupported sampling rate
is requested, the switch will automatically
adjust it to the closest achievable. This will be
reported back in this field.
Flow Sampler
Max. Header
The maximum number of bytes that should be
copied from a sampled packet to the sFlow
datagram. Valid range is 14 to 200 bytes with
default being 128 bytes. If the maximum
datagram size does not take into account the
maximum header size, samples may be
dropped.
Coounter
Poller Enabled
Enables/disables counter polling on this port.
Counter Poller
Interval
With counter polling enabled, this specifies
the interval
– in seconds – between counter
poller samples.
WEB Interface
D. Click
Configuration/sFlow
E. Set required sFlow related parameters
F. Click Save to apply the setting, Reset to restore
the previous setting.
Содержание N1-9802W
Страница 193: ...193 Figure...
Страница 284: ...284 Figure...