123
MVR
Using the MVR configuration page to enable Multicast traffic
forwarding on the Multicast VLANs. In a multicast television
application, a PC or a network television or a set-top box
can receive the multicast stream. Multiple set-top boxes or
PCs can be connected to one subscriber port, which is a
switch port configured as an MVR receiver port. When a
subscriber selects a channel, the set-top box or PC sends
an IGMP/MLD report message to Switch A to join the
appropriate multicast group address. Uplink ports that send
and receive multicast VLAn are called MVR source ports. It
allowed to create at maximum 8 MVR VLANs with
corresponding channel settings for each Multicast VLAN.
There will be totally at maximum 256 group addresses for
channel settings.
LOCATION
:
▼
Configuration
■
MVR
PARAMETERS
:
Items
Description
MVR Mode
Enable/Disable the Global MVR.
The Unregistered Flooding control
depends on the current configuration in
IGMP/MLD snooping
It is suggested to enable Unregistered
Flooding control when the MVR group
table is full
Delete
MVR VID
Check the delete the entry. The
designated entry will be deleted during
the next save
Specify the Multicast VLAN ID
Be Caution: MVR source ports are not
recommended to be overlapped with
management VLAN ports
Содержание N1-9802W
Страница 193: ...193 Figure...
Страница 284: ...284 Figure...