NPort Networks N1-9802W, Руководство пользователя

Страница: 125 / 296

125
Port
Port Role
[Inactive]
[Source]
[Receiver]
[Be Caution]
symbol
The logical port for the setting
Configure an MVR port of the designated
MVR VLAN as one of the following roles.
The designated port does not participate
MVR operations
Configure iplink ports that receive and
send multicast data as source ports.
Subscribers cannot be directly connected
to source ports
Configure a port as a receiver port if it is a
subscriber port and should only receive
multicast data. It does not receive data
unless it becomes a member of the
multicast group by issuing IGMP/MLD
messages.
MVR source ports are not recommended
to be overlapped with management VLAN
ports.
Select the port rule by clicking the Role
symbol to switch the setting.
“I” indicates Inactive, “S” indicates
source;”R” indicates Receiver, the default
Role is Inactive.
WEB Interface
A. Click Configuration/MVR
B. Enable MVR globally on the switch & select MVR
VLAN.
C. Set VLAN interface setting
D. You can also check enable
“fast leaving” for each
port
E. Click Save to apply the setting or Reset to restore
the previous setting.