17
Section 6
Section 6:
WinTest 400 Software
WinTest 400 is a Windows based application that provides the ability to transfer stored AutoTest results
files from a TURBOTEST 400 Main Unit. Once the files have been transferred, certification reports can
be generated for the tested optical fibers listing AutoTest results, along with company, operator, and
job information.
NOTE:
WinTest 400 is not licensed software, you are free to copy it as needed. When documenting
fiber installations, contractors may find it useful to provide a copy of the software and test results to
the customer.
Software Setup
This section describes WinTest 400 system requirements, installation procedures, and basic setup
information.
system requirements
To use WinTest 400 you need the following hardware and software:
• A 400 MHz (or faster) personal computer or laptop with an 800 x 600 (or larger) display
• Windows 9X, NT 4.0, 2000, or XP
• At least 32 megabytes (MB) of RAM
• CD-ROM drive
installing WinTest 400
1 Start Windows. If Windows is running, quit all applications.
2 Insert CD into the CD-ROM drive. (Note: normally the D: drive.)
3 If the Install does not start automatically, from Windows either:
• select Start > Run > enter D:\setup.exe > click OK
• double-click the My Computer icon on the desktop, double-click the CD-ROM icon, and double-
click Setup.exe.
4 Follow the on-screen instructions. A message appears when the installation is complete.
5 Choose OK.
