19
Section 6
• To create a new folder, select the drive and folder where the new folder is to be created, then
click New Folder, enter the name of the new folder, and then click OK.
to open, print and save files
1 To open TURBOTEST 400 AutoTest files, select File, locate the file that you wish to view, then click
Open. Test results will appear in the lower part of the screen. Header information (if previously
entered) will appear in the top part of the screen.
2 To print the open file, select File, then Print. Select the appropriate printer, if it is not already selected.
Enter the number of copies, then click OK.
3 To edit the header information in the open file, tab to the fields you want to change (or click with
mouse) and enter or edit text as desired.
4 To save the open file, select File, then Save (to save as the same file name) or Save As (to save as
new file name). If Save As is selected, enter a new file name or folder, then click Save.
to edit or enter the default header information
1 From the WinTest 400 File menu select Edit Default Header.
2 Enter the required information in the appropriate fields, then click OK.
3 Select File, then Load Default Header to insert the default header into the opened file.
Installing New Main and Remote Unit Software
WinTest 400 provides the ability to install new TURBOTEST 400 software via the units serial ports.
New TURBOTEST 400 software may contain new features, new AutoTest rules, or bug fixes. The latest
TURBOTEST 400 unit software, as well as the latest version of WinTest 400, will be posted on our web
site (www.noyes-fiber.com). Or you may request the software by contacting Noyes.
TURBOTEST 400 Main and Remote Unit software will normally be installed at the same time. In some
cases, however, new software may be released for only one unit. Check the Readme.txt file found with
your new software, or call Noyes Technical Support, for specific instructions. Files containing new
TURBOTEST 400 software will be named T4xx_MAIN_Vyyy.mot or T4xx_REMOTE_Vyyy, where XX
will indicate TURBOTEST 400 model and yyy will indicate software version number.
to install new software
NOTE:
The TURBOTEST 400 software download feature is designed so that the AutoTest results saved
in the Main Unit are not lost during an upgrade. However, it is recommended that all AutoTest tests be
transferred to your PC before you install new software in the Main Unit.
NOTE:
It is recommended that the Turbotest 400 Main and Remote Units be operated from AC power
when performing the following procedures.
1 Using the supplied serial cable, connect the Unit to an available COM Port on the PC.
