17
It is disassembled by removing the two pins. It can be
cleaned in the dishwasher.
The bowl
Is cleaned like regular dishes. Do not hesitate to put it
in your dishwasher.
The basket
Is cleaned with a detergent like regular dishes.
Attention: in order to avoid problems with
oxidation after washing the basket must be
dried thoroughly, or dipped in oil.
The heating element:
Clean it with a damp cloth.
6 INSTALLATION INSTRUCTIONS
− Read the guidelines in this manual and follow them.
− It is necessary to provide a bipolar cut-off device in
the power supply circuit, where the opening of the
contacts is more than 3 mm.
− The plug must be accessible after installation.
− If the supply lead is damaged, it must be replaced by
an equivalent lead (H05RNF 3x1mm²) available from
the after-sales department.
− A 16-ampere fuse is necessary.
− Your fryer uses 2,200 watts. It is therefore necessary
that your supply can provide this power without danger.
IT IS VITAL that your fryer be connected to earth.
It is absolutely imperative to leave a space of
at least 5 cm between the bottom of the fryer
and the first shelf of the kitchen unit
WARNING : If the fryer malfunctions in any
way, unplug the appliance or remove the
fuse corresponding to the sector where the
fryer is hooked up.
Electrical connection:
Commut.
Bipolar switch
Th. Com.
Command thermostat (80-200°C)
Th. Séc.
Security thermostat (250°C)
T1
Heating warming light
R1
Heating element 2200W
7 FITTING
This fryer is built into a work surface or kitchen unit by
simply cutting a hole the corresponding shape.
Any support may be suitable: brickwork, timber, metal,
granite, laminate, etc.
Dimensions of appliance: 520 x 290 x 250 mm
Dimensions of hole cut in work surface: 475 x 270 mm
