Novy 1801 One Power, Инструкция по монтажу

Страница: 19 / 20

19
Procedure:
1) Press simultaneously on both zone selection keys of
the bottom zones during 3 seconds. A beep will sound
and the current power is displayed.
2) To set the power limitation use the [ + ] and [ - ]. To
exit the procedure without saving your changes, don’t
touch any key for 60 seconds.
3) To save the new power limitation, press simultaneous-
ly on both zone selection keys of the bottom zones
during 3 seconds. Once the new limitation registered,
a beep will sound.
6. ACCESSOIRIES
The following accessories can be ordered with the unit:
− Wall passage for flat duct. Inox/SS incl. non-return
valve: article 906407
− Outside wall grate round duct Ø 150 mm. Aluminium
shutter grate: article 906178
− Non-return valve round duct Ø 150 mm: article 906269
− Aluminium tape, roll 50 metres: article 906292
OPTIONAL
(1801 One Power & 1811 One Pro from v13)
Installation I/O module n° 990034
Open the cover of the electrical connection box.
Plug in the I/O module connection cable into the connector.
(See manual 990034 I/O module)