Novus NVR-6432-H2/F, Быстрый старт

Страница: 16 / 60

NVR - 6432 - H2/F
User ’ s manual (Short) ver.1.1
All rights reserved © AAT Systemy Bezpieczeństwa sp. z o.o.
16
I. Network settings :
This menu allows to set up networking. To select desired mode clik - on WORK PATTERN field.
MULTIPLE ADDRESS SETTING mode allows to use address Ethernet Interfaces in separated IP
subnets. NETWORK FAULT TOLERANCE uses one of Ethernet interface as an fault tolerant
connection activated after main connection break down. Default IP configuration is 192.168.1.100
netmask 255.255.255.0. It is possible to configure IP address for switch in INTERNAL ETHERNET
PORT SECTION. Please note that IP subnet for the ETHERNET PORT 1 and ETHERNT PORT 2
were different. In cases where it is necessary to connect NVR to the Internet (for remote access, email
sending, etc.), configure the following parameters: Gateway, Primary and Secondary DNS. You can
also enable DHCP mode which allows you to download an IP address from a DHCP server (required
if running a DHCP server). It is possible to change the default HTTP port designed to display Web
panel of the device and HTTPS ports and port server data. After changing parameter pres NEXT
button.
NVR OPERATING