Novus NVIP-2Q-6101/PIR/W, Быстрый старт

Страница: 10 / 40

NVIP - 2Q - 6101/PIR/W Quick start guide ver. 1.1
All rights reserved © AAT Holding S.A.
10
START - UP AND INITIAL CONFIGURATION
The camera can also be powered via an RJ45 network connector, using PoE (IEEE 802.3af)
technology. Please, use a network switch or an IEEE 802.3af compliant PoE power supply to power
the camera through the PoE.
2.3. Connection of alarm input/output
The camera has one alarm input and output. The alarm input is used to connect a device such as a
motion detector, button, reed switch or photocell. Violation of the input will trigger the alarm and
activate the previously programmed action.
The alarm output enables connection of an external siren and implementation of automatic control
functions, such as switching on lighting.
Podłączenie wejścia alarmowego
Podłączenie wyjścia alarmowego
I Alarm input, configurable: NC or NO
G Ground (common terminal)
O Alarm output terminal, (12VDC/0.1A maks.)
Caution:
It is forbidden to use – as the camera power source – PoE equipment (adapters, etc.) not
compatible with IEEE 802.3af standard (items called “ passive PoE power supply ”). Damages
that results from the usage of improper power supply source are not covered by the warranty.
trigger contact
signaling device
maximum load 0.1A
signaling device power
supply 12VDC max.