NVC-
DN6118SD/IR User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
8
3.2. View of the camera, layout of the camera items
4. MOUNTING THE CAMERA
In order to obtain declared watertightness camera should be mounted on flat, smooth surfaces.
When mounting the camera on uneven/rough surfaces please seal the mounting place additionally
with appropriate sealing mass, paying special attention to mounting holes.
Caution!
Due to safety reasons, maximum load capacity of surface shouldn’t be less than 25kg.
In order to successfully mount a camera, please follow the procedure below:
Put the bracket to the wall in a desired mounting place (with cable hole). Taking the bracket’s
base screw holes (1) as a pattern, mark future drilling holes for screws using a punch.
Drill 4 holes in accordance with previously done markings and base hole placement (when
mounting the camera to concrete surfaces please purchase appropriate mounting accessories)
Put required cables through the bracket arm.
Mount the bracket with seal, paying special attention to all mounting holes and additionally
sealing them with appropriate sealing mass if necessary.
Put the mounting of the camera module (2) in the bracket socket (3)
MOUNTING THE CAMERA
Camera module
Light sensor
IR Illuminator
Wall mount bracket
http://www.e-camere.ro/camere-supraveghere/Novus/NVC-DN6118SD-IR
