NVC-
DN6118SD/IR User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
18
7. CAMERA OSD MENU
Before programming or operating the PTZ camera, you have to select a desired camera number (via
keyboard or another remote controller).
Accessing the camera’s menu depends on the controller type and the protocol used.
All the details regarding camera communication parameters are described in the instruction manuals of
the NV-KBD50/70 keyboards (or other controllers).
Menu is accessible after pressing the
(3s) button,
ESC
closes the menu. When additional
functions (such as tour or auto-scan) are programmed or when camera is in alarm mode, menu is
accessible only after abandoning current mode (e.g. by forcing the tilt or pan movement or by
confirming alarm).
ATTENTION!
Default language is set to English. To change the language in main menu choose the 7. Language,
move joystick right / left and select requested language.
Main menu is depicted below:
Exemplary submenu for editing the name or number is shown below:
Move joystick left /right to indicate the position for editing, then press OPEN. It display the screen:
Select desired character or number, and press OPEN to enter this character at desired possition.
CAMERA OSD MENU
MAIN MENU
1 PTZ Functions
2 Display Settings
3 Control Settings
4 Camera Settings
5 System Settings
6 Password
7 Language
English
Press Close to Exit
_ _ _ _ _ _ _ _ _ _ _
↑
Press Close to Exit
0123456789ABCDEFGHIJKLMN
↑
OPRSTUVWXYZ
Press OPEN to confirm
Press Close to Exit
http://www.e-camere.ro/camere-supraveghere/Novus/NVC-DN6118SD-IR
