NVC-
DN6118SD/IR User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
22
CAMERA OSD MENU
7.1.4. SCAN submenu
Menu allows to set up scan zones, i.e. two points that the camera shuttles between using the shortest
possible track..
START POINT-
selects the starting preset.
END POINT -
selects the ending preset.
SPEED-
allows to set the speed of rotation (1- the slowest, 6 the fastest)
DIRECTION -
Define the direction of the movement:
S-Circle -
camera scan smaller circle section (smaller angle)
L-Circle -
camera scan larger circle section (larger angle)
RUN
- starts the scan.
7.1.5. AUTO PAN submenu
The menu allows you to configure Auto Pan. It is
automatic full pan rotation.
It causes omnidirectional
scan from the selected camera position.
START POINT-
selects the starting preset.
SPEED-
allows to set the speed of rotation (1- the slowest, 6 the fastest)
DIRECTION -
Define the direction of the movement:
RUN
- starts the auto pan function.
Scan
1 Start Point
2 End Point
3 Speed
4 Direction
S-Circle/L-Circle
5 Run
Press CLOSE to Exit
Auto Pan
1 Start Point
2 Speed
3 Direction
Left/Right
4 Run
Press CLOSE to Exit
http://www.e-camere.ro/camere-supraveghere/Novus/NVC-DN6118SD-IR
