Novus NVAHD-2DN5220MSD/IRH-2, Руководство пользователя

Страница: 14 / 48

NVAHD-2DN5220MSD/IRH-2 User’s manual ver.1.2
All rights reserved © AAT Holding S.A.
14
2. Video Parameter
Stream - Stream ID (choose one from available streams)
Bite Rate Type - Information about bit rate type
Bit Rate (kbps) - Information about bit rate
I Frame Interval - Information about I frame interval
Quality - Information about quality
USE TIME STAMP - Video buffer (increases delay when enabled, maximum delay is 5s)
NOTICE: USE TIME STAMP function will not be available when using Flash instead of ActiveX.
3. PTZ Control Panel
PTZ Configure:
Preset - Programming, deleting, and recalling presets
Track - Programming, deleting, and recalling tracks
Speed - Setting speed of movement
3D Position - Turns on/off control using the mouse
North - Setting orientation of the camera
Timer - Setting schedules
PTZ Control:
Arrow keys - Controlling the movement of the camera: up/down, right/left
„ Home ” key - Function unavailable
Zoom - Zoom control
Focus - Focus control
Iris - Function unavailable
Brush - Function unavailable
On/Off IR - Function unavailable
4. Menu bar
Change Password - Change users password
NOTICE: Default password "pass" can be restored only after restoring default settings of the camera)
Sign Out - Log out from camera
5. Video Control
Camera - Default number of the camera is 1.
Video - Turn on/off video
Audio - Turn on/off audio
Interphone - Turn on/off Interphone
NOTICE: Audio and Interphone functions will not be available when using Flash instead of Activex.
SETTINGS
3.1.5
ALARMS SETUP
submenu
The submenu contains settings for alarm inputs / outputs and reactions to alarm events.
INPUT CHANNEL
- allows to choose of an alarm input
ALARM ACTION
- allows to choose reaction (preset [PRE], patrol [TOUR], scan [SCAN], observation
route [PAT]) to an alarm event
ACTIVATE AUX
- allows to choose alarm output
ALARM CONTACT
- allows to set the state of the relay (NO/NC)
RESET DELAY
- allows to set the duration of the alarm on the alarm output
ARM SETTING
- allows to set the alarm activity schedule (armed / disarmed day and time)
BACK
- back to previous menu
4. CAMERA submenu
The submenu contains the initial settings of the camera module and allows to enter the main
menu of the camera module.
The submenu allows to set:

Displaying the current zoom value

Autofocus mode (auto, manual, keyauto)

Zoom speed

Camera module restart

Restore defaults

Entries to the main menu of the camera module -
NEXT
Items signed a sign can be called:

From NVR by button or „ +” button near IRIS option

From the keypad by the OPEN button