Novus NV-IR120/40LED, Руководство пользователя

Страница: 5 / 12

NV-IR60/80LED, NV-IR120/40LED - User’s manual ver. 1.0
All rights reserved © AAT Holding S.A.
5
4. DIMENSIONS
5. INSTALLATION
Before the installation process, familiarize yourself with the product, its parameters and installation
method.

Unscrew the mounting bracket from the illuminator

Place the assembly template to the place of assembly and mark the places for the holes for fastening
screws.

Drill holes for fastening screws.

Apply a foam pad under the mounting bracket.

Screw the fixing bracket to the ceiling / wall surface using metal anchors and screws.

Gently screw the illuminator to the mounting bracket with screws and rubber washers.

Set the illuminator to the final position.

While holding the illuminator, tighten it to the mounting bracket.
Warning! Pay special attention to the surface to which the handle and the illuminator is attached
had adequate load capacity.
Warning! The illuminator must be supplied from sour ces with appropriate voltage and current
efficiency. Use of a power source with inadequate parameters may result in improper device operation
or damage.
Warning! When connecting DC power supply, special attention should be paid to the polarity.
Note: The power supply is not included.
TECHNICAL SPECIFICATION