NV-DVR1104/CD, NV-DVR1108/CD and NV-DVR1116/CD ver. 1.1 - user's manual
All rights reserved © NOVUS Security Sp. z o.o.
56
12.4.2 PTZ camera control in „live” mode
If PTZ cameras are connected in the system and all settings, as described in chapter 9, are adjusted
properly it is possible to control these cameras via network applet, after connection with multiplexer.
CAUTION: before start controlling cameras via network, all settings and connections should be tested
by controlling camera using front panel buttons or IR remote control. If everything works properly it is
possible to control cameras via network.
Camera control can be run in various display modes. It is impossible to control camera in full screen
display mode, when all control buttons are hidden..
In order to control camera using applet, specific camera should be selected by mouse left button single
click on required camera image. Selected camera will be marked with red border. During camera
control following buttons, collected in right section, are active
CAUTION: PTZ control is available only with
admin
authorization, in other cases above menu does
not appear.
NETWORK CONNECTION FEATURE
Camera PAN, TILT
control
Focal lenght control
(ZOOM)
First TOUR
activation
