NDR-BA2208-II, NDR-BB2208, NDR-BA2416, NDR-BA4104-II, NDR-BB4104, NDR-BA4208
and NDR-BA4416
User’s manual (short) ver.1.3
All rights reserved © AAT Holding sp. z o.o.
15
2.5.
Electrical connection and other rear panel elements of NDR-BB4104 DVR.
1.
RS-485
:
one RS-485 bus port for connecting external keyboard or PTZ cameras
(RS485: A+, B-)
Note:
Only one of the devices may be connected at a time.
2.
DC12V:
12V DC power socket for connecting included power adaptor.
3. USB:
USB 2.0 port for external Flash memory and mouse connection.
4 LAN:
RJ-45 connector port for connecting to the local network and internet.
5. HDMI MONITOR:
Main monitor connectors, use the HDMI cable to connect to a 1080p 60Hz
(1920x1080) monitor.
6.
VGA:
Main monitor connector, VGA type. Please use signal cable provided with
the monitor when using aforementioned connection type.
7.
VIDEO OUT
:
Main monitor connectors,
8. AUDIO OUT:
Audio out port for connecting local speaker with pre-amplifier.
9.
VIDEO IN:
8 video inputs for connecting video signal sources to the DVR.
10. AUDIO IN:
A
udio (mono) inputs for connecting microphones with pre-amplifiers
11.ALARM IN:
8 alarm inputs, which may be set either as normally open (N.O.) or normally
closed (N.C.). In order to detect the alarm, signal should last for minimum
0.5sec .
12. ALARM OUT :
Alarm relay output, max. load capacity of the outputs is 0,5A/125VAC and
1A/30VDC. (NO, COM)
13.
SPOT OUT
:
SPOT monitor output, allowing to display any camera/sequence of cameras
full screen.
14. POWER SWITCH:
DVR power switch
.
Note:
OSD menu will be displayed on the VGA monitor by default. To switch the OSD display from VGA to
BNC, please press and hold the ESC button for 5 sec.
STARTING THE DEVICE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
