Development and manufacturing of non-
destructive testing units and system
Ultrasonic Flaw Detector NOVOTEST UD2301
12
The main menu of flaw detector is consists of four sections:
- Measurements;
- Archive;
- Setup;
- Information.
6.4. Connecting the transducer to the flaw detector
Combined probe is connected to the left connector on the top panel
of flaw detector and set in parameter group "Probe" parameter
"DUAL" to "OFF".
Dual element transducers connect as follows: emitting plate of dual
probe connect to the left connector, and the receiving plate connect
to the right connector on top side of body of the flaw detector by
inserting the cable connectors until its click. Set the parameter group
"Probe" parameter "DUAL" to "ON".
6.5. The main modes of operation of the flaw detector
"Measurement" mode
- goes to the measurement;
"Archive" mode
- displays all stored measurement results and
settings;
"Settings" mode
- in this mode you can set the following settings:
Time, Date, Language, Brightness, Palette, Sound, Auto off, Clear
SD;
"Information" mode
- display information about the manufacturer.
To select the required mode, move cursor by keys to select mode,
and confirm selection by pressing the Enter button.
6.5.1 "Measurement" mode
"Measurement" mode is the main mode (Pic. 6.5.1), designed for
ultrasonic testing.
