Development and manufacturing of non-
destructive testing units and system
Ultrasonic Flaw Detector NOVOTEST UD2301
11
6.3. Turning on the flaw detector
If operation will be carried out by an external power supply, it is
necessary to connect the power supply unit of the flaw detector to
the power connector, located on the down side of the devices body.
Operation of the device is possible during battery charging.
Before switching on flaw detector connect transducer. Connect the
power adapter supplied with flaw detector to the corresponding
connector. If you connect the battery and power supply, the flaw
detector is powered from the power supply, if the power supply is
disconnected, flaw detector automatically goes to battery supply.
To enable (disable) flaw detector press
and hold it for at least
3 seconds to short beep.
When you turn on the device screen of main menu is displayed.
Picture 6.3. Main menu of the flaw detector.