Development and manufacturing of non-
destructive testing equipment and system
Hardness tester NOVOTEST T-UD3
13
8.3.1. Measuring
Selecting
Measuring
, you go to the measurement of hardness
mode, depending on the probe it will display the angle of the probe
at the top of the screen (for rebound probe), or the state of the
diamond indenter (for UCI probe).
Detailed description of the measurement of hardness, see
paragraph
9.
8.3.2. Calibration
Selecting
Calibration
, you go to the table of calibrations where the
scale conventionally divided into eight hardness scales: Rockwell
(HRC), Brinell (HB), Vickers (HV), Rockwell (HRB), Shore (HS),
User 1 (U1), User 2 (U2), User 3 (U3).
Each of the scales can be calibrated to 11 conventional materials:
Steel (ST), Alloy Steel (AST), Stainless steel (SST), Cast Iron (CI),
Nodular Iron (NI), Aluminums (Al), Brass (BRS), Bronze (BRZ),
Copper (CU), User material 1 (U1), User material 2 (U2).
