manualshive.com logo in svg

Novexx AP 5.4 Gen II, Руководство пользователя

Поделиться
Скачать
Novexx AP 5.4 Gen II Скачать руководство пользователя страница 202

06/15 Rev. 6.00-02

USER- / SERVICE MANUAL

Info-Printouts & Parameters

AP 5.4 Gen II – AP 5.6

60

EasyPlug error

AP 5.4

AP 5.6

Handling of errors caused by faulty Easy-Plug commands.

Tolerant handl.

The label is printed, after the Easy-Plug/Bitimage error was acknowledged 
(default setting).

Strict handling

The Easy-Plug command, which caused the error, is displayed after approx. 
2 seconds in the lower display line. The displayed text is up to 30 characters 
long and is scrolled automatically.

If a single character caused the error, this character is marked with „>> <<„  
in the display text, to facilitate the detection.

By pressing the cut button, the display can be toggled between error mes-
sage and Easy-Plug command text.

After acknowledging the first occured Easy-Plug error, the printjob and the 
spooler are deleted (as by #!CA). This prevents the printing of labels with for-
mat errors.

Single job mode

AP 5.4

AP 5.6

In single job mode (also stop mode) the printer stops after every job and waits 
until the operator restarts the print process.

Off

Single job mode is switched off (default setting).

On

Single job mode is switched on. The printer always displays "Start next job", 
before starting a new print job. This requests the user to acknowledge by 
pressing the Online button.

Head resistance

AP 5.4

AP 5.6

For optimum print quality, the individual print head resistance of the thermo 
head employed in the device must be set once with this parameter.

When replacing the print head, the resistance value of the print head (to be 
read off from the print head) must be entered again.

The value set here remains when the factory settings are carried out.

xxxx Ohm

Setting range: 1000 to 1500 Ohm; Unit interval: 1 Ohm

Setting the print head resistance:

CAUTION!

Entering a false value can damage the print head.

Read off the correct value from the print head and set it accordingly.

Содержание AP 5.4 Gen II

























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды