manualshive.com logo in svg

Novexx AP 5.4 Gen II, Руководство пользователя

Поделиться
Скачать
Novexx AP 5.4 Gen II Скачать руководство пользователя страница 107

06/15 Rev. 04

USER MANUAL

Advanced Applications

AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x

20

Transmission with LPD Server

Printing data can be transmitted to the printer using the LPR/LPD (Line Printer Dae-
mon) protocol (“BSD Spooler”).

This protocol is supported by

• all Unix derivatives
• Windows NT, Windows 2000 und Windows XP

The print queue of the host must be named „lp“!

Example

1. Set parameter 

INTERF.PARAM. > EASYPLUGINTERPR > Interface

 to „LPD server“.

2. Send the printjob file (here: „test.txt“) as illustrated using the „lpr“ command [8].

[8] Sending a printjob with the „lpr“ command.

Enter „lpr ?“ to get a list of the admissible command options.

For the use of LPD server under Windows NT or Windows 2000, please refer 

to the following link:

http://support.microsoft.com/default.aspx?scid=kb;EN-US;179156 

For the use of LPD server under Windows 95 and Windows 98, a software 

package from external providers is required  (e.g. Windows LPR Spooler, see the 
following link).

http://home.arcor.de/Heil-Consulting/ 

Troubleshooting

The following should be checked if a problem occurs:

• Ethernet connection: The yellow LED belonging to the printer network socket must 

be illuminated. If this is not the case, possible sources of error are:

– that the network is not connected to the outlet.
– ISDN outlet: Erroneous, the network cable was connected to an ISDN instead 

of a network outlet. Both outlet types do not differ mechanically.

– an incorrect cable (ISDN cable?) is used to connect the printer to the network 

outlet.

– a defective hub/switch.
– a defective printer board.

• IP parameter: The defined parameters or parameters set via DHCP are displayed 

in the “Printer Status” printout. A “ping” to the set IP address must return an echo. 
This also works if a different interface is set in the Easy Plug Interpreter parameter. 
Possible source of error: Incorrect configuration of a network participant.

• On the printer, either “TCP/IP socket” or “LPD server” must be set in the Easy Plug 

Interpreter parameter.

Содержание AP 5.4 Gen II

























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды