User Manual
Rewinder XLP 51x
TECHNICAL DATA
Motor
Stepper motor
Position sampling
Hall sensor
Rotation direction
Rewind direction with label facing outside or inside
Rewind speed
XLP 51x: Max. 254 mm/s (10 Inch/s)
Noise level
< 70dB(A)
Material roll
See table:
Max. outer Ø
230 mm
Core inner Ø
38/76 mm (1,5/3")
Min. material width
= Minimal print width
Max. material width
= Width of the rewinding mandrel (120/185 mm)
Max. roll weight
5 kg
SYSTEM REQUIREMENTS
Rewinders in the appropriate width can be operated at the following printer types:
Printer
Width
Core Ø
Article number
38 mm (1.5“)
N103130
XLP 514
120 mm
76 mm (3“)
N103131
38 mm (1.5“)
N103137
XLP 516
185 mm
76 mm (3“)
N103138
Preparation for peripheral devices:
For using the printers with a rewinder, they must be especially equipped. This so called peripherals
preparation consists mainly of an additional output stage board for the motor of the peripheral device
and of some additional connection cables. From the outside, the peripheral preparation can be identi-
fied by the D-Sub connector (A) on the front side of the printer:
A
Fig. 3: The D-Sub connector (A) is an indicator for the peripheral preparation of the printer.
Edition 2b - 9/2021
6
Product description
Technical data
