User Manual
Rewinder XLP 51x
2.
Feed the end of the material web around dancer arm and winding core according to the winding
diagram (picture at the top) and fix it with the clamping bar. To do so, push the clamping bar with
both
ends
over
the material:
If a cardboard core is used: Push the clamping bar
underneath
the cardboard core.
3.
Remount the guide disk.
The recesses at the inner diameter of the guide disk (A) must be positioned over the clamping
bar legs (A).
4.
Push the guide disk up to the material edge. Close the clamping lever.
The guide disk may not wedge in the material.
Edition 2b - 9/2021
13
Operation / Malfunction / Cleaning
Inserting material
