04/13 Rev. 1.12-02
USER / SERVICE MANUAL
Mounting/Setup
LA-TO / LA-TO XL
Assembly
16
Installing the pressure regulator
Tools:
•
Screwdriver
•
5 mm hex screwdriver
The pressure reducer can be fastened directly onto the
enclosure [19C] or using a mounting bracket [19A].
Fasten the pressure tubes so that the air flows
through the pressure regulator in the direction of the ar-
row [20B].
The connector marked with an arrow is the com-
pressed air outlet. This must be connected to the appli-
cator.
The compressed air outlet can be optionally set to
the right or left on the pressure regulator.
Installing the compressed air outlet for the opposite
side:
1. Remove the bolt plug [20A].
2. Remove the manometer [20C].
3. Install the bolt plugs and manometer to their oppo-
site sides.
Fastening
Bolts
Hole separation
With bracket
M6x16
28 mm
Without bracket
M4x45
35 mm
[19] Mounting the pressure regulator
[20] Rear view of the pressure regulator. Arrow = flow direction.
A
C
A
B
C
