Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010, Справочное руководство

Страница: 57 / 200

Working with Entitlements 57
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
7 Configure the entitlement by doing the following:
Š
Add information about purchased licenses. See Section 7.3, “Adding Catalog Products,”
on page 58 and Section 7.4, “Adding Purchase Summary Records,” on page 60 .
Š
Add information about installations. See Section 7.5, “Adding Discovered Products,” on
page 61 .
Š
Specify the users or devices covered by the entitlement. See Section 7.6, “Specifying User
and Device Coverage,” on page 63 .
7.2.2 Creating a Manual Entitlement
1 In ZENworks Control Center, click the Asset Management tab.
2
On the License Management page, click Licensed Products .
3 Click the product for which you want to create an entitlement.
4 Click the License Entitlements tab.
5 In the Entitlements (Consumption Data Source: Manual) panel, click New to launch the Create
New Entitlement Wizard. Complete the wizard by using the information in the following table:
Wizard Page Details
License Model Choose one of the predefined license models. These license models
are intended to match the license models most commonly used in
license agreements. If your license model is not represented, select
Other and specify the license model.