Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010, Справочное руководство

Страница: 158 / 200

158 ZENworks 10 Asset Management Reference
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
4 Click OK to create the date notification.
The Date Notification check box is enabled. In addition, a date notification record is added to
the Date Notifications list (
Configuration > Contract Management > Date Notifications ). For
information about the list, see Section 24.4, “Viewing the Date Notifications List,” on
page 158 .
5
Click Apply to save the changes to the contract.
24.4 Viewing the Date Notifications List
You can view a list of all date notifications. The list provides general information about each
notification, such as its status, number of times sent, and next scheduled send time.
1 In ZENworks Control Center, click the Asset Management > Contract Management .
2 Click Date Notifications .
The list provides the following information for each notification:
Name: The ID of the contract to which the date notification applies. You can click the contract
ID to display the contract’s details.
Field: The date field to which the notification applies.
Status: The status of the date notification.
Š
Pending : The first notification message has not been sent yet.
Š In-Progress : One or more notification messages have been sent and more are scheduled to
be sent.
Š Completed : All scheduled notification messages have been sent.
Š
Disabled : The date notification is no longer active.
Sent: The number of notification messages that have been sent.
Failures: The number of sent notification messages that failed. You should ensure that you
have specified an e-mail server ( Configuration > Management Zone Settings > Event and
Messaging > SMTP Settings ) and that the recipient is a valid.
Last: The date of the last notification message attempt.
Next: The date of the next notification message attempt.
24.5 Filtering the Date Notifications List
You can filter the Date Notifications list to display only the notifications that meet certain criteria.
1 In ZENworks Control Center, click the Asset Management > Contract Management > Date
Notifications .