Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010, Справочное руководство

Страница: 29 / 200

Configuring Compliance Settings
3
29
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
3
Configuring Compliance Settings
There are two ZENworks
®
Management Zone settings related to license compliance. One setting
determines when the compliance engine runs each day and the other setting determines the user
source (authoritative user source or Inventory user data) for user-based license models.
To configure the settings:
1 In ZENworks Control Center, click the Configuration tab.
2 In the Management Zone Settings panel, click Asset Management to display the settings.
3 Configure the Compliance setting:
3a Click Compliance .
3b Select the time you want the compliance engine to run each day.
The compliance engine refreshes the compliance data and status for each licensed product.
The default run time is 11:00 pm each day.
3c Click OK .
4
Configure the User Source setting:
To support user-based license models (Per-User and Per-Named User), Asset Management
requires an installation-to-device-to-user association so that any product installations on a
device can be assigned to the device’s user. The installation-to-device association is created
through Inventory scans. There are two different user sources that can be used to provide the
device-to-user association.
4a
Click User Source , then select one of the following user sources:
Š
Inventory user data: Each device’s Inventory data includes an Entered User field
that associates a user to the device ( Device tab > device > Inventory page > Detailed
Hardware/Software Inventory link > Entered User field).
Asset Inventory does not automatically populate the Entered User field. If you use
this source, make sure that each device has an Entered User . There are three ways
that you can populate the user information: 1) collect the information from users
through an automated Inventory Collection Data form, 2) manually enter the user
information by editing a device’s Inventory data in ZENworks Control Center, or 3)
migrate Inventory data from ZENworks 7.5 Asset Management.
Š
Authoritative user source: This is the LDAP directory (or directories) your
ZENworks Management Zone connects to for user information. By default, the
ZENworks system is configured to automatically assign users from this source as
primary users on devices. If a device has multiple users, the primary user is
determined by a calculation method that you can select (usage based, login based, or
direct assignment).
You can use only one source at a time. If you change the source, all existing assignments
of licenses to users are removed.
IMPORTANT: If you are using ZENworks 7 Desktop Management with ZENworks 10
Asset Management on the same devices, use the Inventory user data option instead of the
Authoritative user source option. The Authoritative user source option requires the