Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010, Справочное руководство

Страница: 105 / 200

Working with Software Collections
11
105
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
11
Working with Software Collections
In some cases, the ZENworks
®
Knowledgebase might not include a discovered product for a
software suite you own. There are various reasons for this, ranging from the suite not yet being
defined in the current Knowledgebase to the suite installation not registering as a suite.
A software collection is an administrator-defined suite. You create the software collection and add
discovered products as members of the collection. When all of the member products are discovered
on a device, the installation count for the software collection is incremented rather than the count for
the individual member products. You can assign the software collection to a licensed product just as
you would assign an individual discovered product or a suite discovered product.
The following sections explain the tasks associated with managing purchase records:
Š
Section 11.1, “How Software Collection Installations are Counted,” on page 105
Š
Section 11.2, “Creating a Software Collection,” on page 106
Š
Section 11.3, “Adding Products to a Software Collection,” on page 106
Š
Section 11.4, “Deleting a Software Collection,” on page 107
Š
Section 11.5, “Creating a Software Collection Folder,” on page 107
Š
Section 11.6, “Moving a Software Collection,” on page 108
11.1 How Software Collection Installations are
Counted
A software collection’s member products can be required or non-required. Required member
products must be found on a device in order for the installation to qualify as a software collection
installation. Non-required member products, if installed on the machine, are considered part of the
software collection but are not required to be installed.
Consider the following example. SoftwareCollection includes three member products:
Š ProdA (required)
Š
ProdB (required)
Š ProdC (non-required).
The member products are installed as follows:
Š Device1: ProdA, ProdC
Š
Device2: ProdA, ProdB
Š Device3: ProdA, ProdB, ProdC
Š
Device4: ProdA
The Discovered Products list would show the following:
Š
SoftwareCollection: 2 installations (Device2, Device3)
Š ProdA: 2 installations (Device1, Device4)