Novell Server Consolidation and Migration Toolkit 1.1, Руководство администратора, Страница: 95 / 126

Migrating Data from NetWare Servers
11
no
vd
ocx
(E
NU)
9 Decem
ber
200
5
95
11
Migrating Data from NetWare
Servers
After you have completed the prerequisite procedures in Chapter 10, “Preparing for a Server
Migration,” on page 91 , you are ready to migrate data from your NetWare
®
source server. To do
this, complete the following tasks in the order they are listed:
1. Launch Migration Wizard and Create a Project File (page 95) .
2. Model Your Migration Project (page 96) .
3. Verify Your Migration Project (page 98) .
4. Migration Step 1: Copy File System Data (page 98) .
5. Migration Step 2: Edit Configuration Files (page 101) .
6. Migration Step 3: Begin NDS/eDirectory Migration (page 101) .
7. Migration Step 4: Finish the NDS/eDirectory Migration (page 104) .
8. Perform Post-Migration Tasks (page 105) .
11.1 Launch Migration Wizard and Create a
Project File
1 If you have not already done so, start the Server Consolidation and Migration Toolkit.
By default, the toolkit is installed in
c:\program files\novell server
consolidation and migration toolkit
. You can access it on the desktop by
clicking Start > Programs > Novell Server Consolidation and Migration Toolkit > Novell
Server Consolidation and Migration Toolkit .
2
Read the Welcome screen, then click Create or Open Project .
3 Select NetWare or Open Enterprise Server (eDirectory) , then click Next .
4 Select Migrate Data to New Server (Hardware Upgrade) , then click Next .
NetWare Migration Wizard 8.1 is launched.
5 Read the About screen, then click OK .
6
Do one of the following:
• To start a new migration project, select Create a New Project > OK .
• To open an existing project, select Open an Existing Project > OK , select the project file
you want to work on, and then click Open .
• To open the last project you worked on, select Open Last Project > OK .
7
Name the project, select a place to save it, type a descriptive filename, then click Next .
By default, Migration Wizard saves all projects to
c:\program files\novell
migration wizard
. You can click Browse to select a different location.
Migration Wizard uses a project (
.mdb
) file to record your progress throughout the migration.
At any point before the migration is complete, you can exit Migration Wizard and restart the
utility to pick up where you left off.