Novell Server Consolidation and Migration Toolkit 1.1, Руководство администратора, Страница: 112 / 126

112 Novell Server Consolidation and Migration Toolkit Administration Guide
no
vd
ocx
(E
NU)
9 Decem
ber
200
5
5
Specify the Admin username and password.
6 Press Enter to reference a different object.
This object is used when NDS/eDirectory is restored back to the source server.
WARNING: Do not press Esc. If you do, the server references you entered will not be saved or
restored to the server.
7 Specify the full Admin username as the placeholder object distinguished name.
8
Specify Root as the distinguished name to change from.
9 (Conditional) If the information about the single reference time source appears, review the
information and press Enter.
10 (Conditional) If your server holds the master copy of a replica, press Enter when you see a
warning.
11 Designate another server to hold the master replica.
You can choose to let NWCONFIG randomly select another server or you can designate one
yourself.
12
Return to the NWCONFIG utility and select Remove Directory Services from This Server to
verify that NDS/eDirectory has been removed.
If a message appears saying that NDS/eDirectory has already been removed, bring the
destination server down and continue with the next section,
Remove NDS/eDirectory from the
Source Server .
If NDS/eDirectory was not successfully removed, exit NWCONFIG and enter
nwconfig -
dsremove
at the destination server console. Then follow this procedure again, beginning with
Step 2 on page 111 .
12.11.3 Remove NDS/eDirectory from the Source Server
After NDS/eDirectory has been removed from the destination server, remove NDS/eDirectory from
the source server.
1 Restart the source server by entering
server
at the DOS command prompt.
2 Enter one of the following:
•
load install -dsremove
(if source server is running NetWare 4)
•
nwconfig -dsremove
(if source server is running NetWare 5 or later)
INSTALL or NWCONFIG will now ignore any warnings or errors during the removal of NDS.
3 Select Directory Options > Remove Directory Services from This Server .
4 Press Enter to skip past any warning screens.
5 Select Yes to remove NDS/eDirectory.
6
Press Enter to skip the error message warning you that eDirectory is locked.
Ignore, but keep track of, any additional eDirectory error messages that appear.
7 When the INSTALL or NWCONFIG menu appears again, select Remove Directory Services
again.
If a message indicates that eDirectory is already removed, continue with the next section, Restore
NDS/eDirectory to the Source Server .