Novell Server Consolidation and Migration Toolkit 1.1, Руководство администратора, Страница: 56 / 126

56 Novell Server Consolidation and Migration Toolkit Administration Guide
no
vd
ocx
(E
NU)
9 Decem
ber
200
5
• If the source or destination location is incorrect, click Cancel and make the appropriate
changes in the Project Window.
At the end of the verification, the results dialog is displayed. To ensure a smooth migration, you
should resolve all errors before proceeding.
8
When you are ready to commit the changes, run the consolidation.
See
Section 6.7, “Run the Consolidation,” on page 53 for more information.
9 Upon completion, review both the success and error log files.
The log file uses three possible states to identify the success of the migration fo each Printer
Agent:
• Success indicates that the Printer Agent was created on the destination server with all of
its attributes and drivers.
• Partial Success indicates the Printer Agent was created on the destination server but not all
of its attributes and drivers were included, so you should review its configuration.
• Failure indicates that the Printer Agent was not created on the destination server.
6.9 Consolidating Data to or from a NetWare 5.1
Cluster
When a volume is cluster enabled, an object is created in eDirectory with the name of the cluster
followed by an underscore followed by the volume name (for example, cluster1_vol1). For the
Server Consolidation Utility to function properly with a NetWare 5.1 cluster-enabled volume, the
server name followed by an underscore followed by the Volume Name object must be used in the
Project Window instead (for example, server1_vol1).
This substitution can be accomplished by completing the following steps:
1 Start ConsoleOne, and browse to the context where the NCP
TM
Server object resides.
2 Right-click the right pane, select New > Volume , then type the name of the new object in the
first field.
This should be the server name followed by an underscore followed by the volume name.
3
In the second field, browse and select the appropriate server.
4 In the third field, select the volume from the drop-down menu, then click OK .
5 In the Server Consolidation Utility Project Window, refresh the container where the Volume
object is located to make the new object appear.
6
When dragging-and-dropping in the project window, use the newly created Volume object.
If you use the
clustername_volumename object instead of creating and using the new Volume
object, a critical SMDR error will occur and you won’t be able to complete the consolidation
process.
7 After the consolidation is complete, you can delete the newly created Volume object.
6.10 Consolidating Data to Novell Branch Office
Novell Branch Office (formerly Nterprise Branch Office) server is a business office management
solution that reduces the costs and challenges of managing and using offices in remote locations.
Novell Branch Office is server software that you can deploy on hardware at remote offices and still