Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT, Руководство по развертыванию, Страница: 142 / 322

8.2 Setting Up Graphics Card and
Monitor
After the installation you can change the configuration of your graphics system
(graphics card and monitor) according to your needs. Such a change can be necessary
because of accessibility issues or hardware upgrades.
WARNING: Changing Monitor Frequencies
Although there are safety mechanisms, you should still be very careful when
manually changing the allowed monitor frequencies. Incorrect values might
destroy your monitor. Always refer to the monitor's manual before changing
frequencies.
Change the resolution, if fonts are too small or if circles appear misshapen. Proceed as
follows:
1
In YaST, click Hardware > Graphics Card and Monitor. SaX2 checks the system
resources and displays a window.
2 Make sure the monitor is properly detected. If not, use Change to select the ap-
propriate model from the list.
3 Select an appropriate Resolution and Colors, if necessary.
130 Deployment Guide