Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT, Руководство по развертыванию

Страница: 84 / 322

If an
ftp
or
smb
URL is given, specify the username and password with the URL.
These parameters are optional and anonymous or guest login is assumed if they
are not given.
Install=ftp:// user : password @ server / directory /DVD1/
In case of a Samba or CIFS installation, you can also specify the domain that should
be used:
Install=smb:// workdomain ; user : password @ server / directory /DVD1/
UseSSH=1 UseVNC=1 Display_IP=192.168.42.42
Depending on which parameter you give, a remote X server, SSH, or VNC will be
used for installation.
UseSSH
enables SSH installation,
UseVNC
starts a VNC
server on the installing machine, and
Display_IP
causes the installing system
to try to connect to an X server at the given address. Only one of these parameters
should be set at any time.
IMPORTANT: X Authentication Mechanism
The direct installation with the X Window System relies on a primitive au-
thentication mechanism based on hostnames. This mechanism is disabled
on current SUSE Linux Enterprise Server versions. Installation with SSH or
VNC is preferred.
To allow a connection between YaST and the remote X server, run
xhost <IP
address>
with the address of the installing machine on the remote machine.
For
VNC
, specify a password of six to eight characters to use for installation:
VNCPassword=<a password>
For
SSH
, specify a password of six to eight characters to use for installation:
SSHPassword=<a password>
4.4.4 Example Parmfiles
For an automatic installation with AutoYaST in an LPAR, it is preferred that the
parmfile has just one long line. If multiple lines are desired for readability, use blank
characters at the beginning and end of each line. The maximum number of lines in a
parmfile is 10.
72 Deployment Guide