Compatibility mode with OS/390 and z/OS
2
• Network device type
osa
with interface
lcs
:
ReadChannel=0.0.0124
Portname=1
ReadChannel
stands for the channel number used in this setup. A second port
number can be derived from this by adding one to
ReadChannel
.
Portnumber
is used to specify the relative port.
• Interface
iucv
:
IUCVPeer=PARTNER
Enter the name of the peer machine.
• Network device type
osa
with interface
qdio
for OSA-Express Gigabit Ethernet
and OSA-Express High-speed Token Ring:
ReadChannel=0.0.0524
WriteChannel=0.0.0525
DataChannel=0.0.0526
Portname=FEF400
For
ReadChannel
, enter the number of the READ channel. For
WriteChannel
,
enter the number of the WRITE channel.
DataChannel
specifies the DATA
channel. For
Portname
, enter an appropriate port name. Make sure that the READ
channel carries an even device number.
• Interface
hsi
for HiperSockets and VM guest LANs:
ReadChannel=0.0.0624
WriteChannel=0.0.0625
DataChannel=0.0.0626
For
ReadChannel
, enter the appropriate number for the READ channel. For
WriteChannel
and
DataChannel
, enter the WRITE and DATA channel
numbers.
Appendix
45
