Novell LINUX ENTERPRISE DESKTOP 10 SP1 - GNOME 23-05-2007, Руководство пользователя, Страница: 92 / 280

92 SUSE Linux Enterprise Desktop 10 SP1 GNOME User Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
To specify your computer’s sleep settings:
1 Click Computer > Control Center > System > Power Management .
2 Click the tab for the type of power you are using.
If your computer uses AC power, click
Running on AC .
If your computer runs on battery power, click Running on Battery .
If your computer operates on both AC and battery power, you can configure the settings on
both tabs. The settings you choose are in effect no matter which power source you use.
3 Use the sliders to set the amount of inactive time that passes before the display and computer
go into sleep mode.
When the display is in sleep mode, the computer continues to run. When the computer is in
sleep mode, power to the display and hard disk is shut off and the computer uses only the power
needed to maintain the contents of RAM.
4 Click Close .
The options you selected go into effect immediately.
Setting General Power Options
To set general power options, click Computer > Control Center > System > Power Management ,
then click the General tab. On this tab, you can choose:
Š
The sleep type to use when the computer is inactive
Š How and when the Power icon displays
2.4.6 Setting Preferred Applications
The Preferred Applications module allows you to specify which applications to use for various
common tasks:
To change any of these settings:
1 Click Computer > Control Center > System > Preferred Applications .
2 Click the tab for the type of application you want to set.
The following list shows the options and default settings.
Š
Web browser
Default: Firefox
Š
Mail reader
Default: Evolution
Š
FTP
Default: Firefox
Š
News
Default: Pan
Š
Terminal
GNOME Terminal