Novell IFOLDER 3 - ADMINISTRATION, Руководство пользователя

Страница: 56 / 148

56 Novell iFolder 3.x Administration Guide
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
5 When the system prompts you to restart the Apache server, accept the option by clicking Yes .
Restarting Apache is necessary to use the new settings.
6
(Optional) Tune the performance of the Web Access server by configuring its HTTP runtime
parameters.
For information, see
Section 9.4, “Configuring the HTTP Runtime Parameters,” on page 97 .
7 If it is not already installed, go to Novell iManager to install the Novell iFolder 3 plug-in or to
manage iFolder services.
For information, see
Installing the Novell iFolder 3 Plug-In for iManager . You use the plug-in
to provision users for services and to manage iFolder services, user access, and iFolders. There
are no specific Web Access settings to with the plug-in.
Reconfiguring Web Access
If you run the iFolder 3. x Web Access configure again, a new link is created on the Novell iFolder
3. x Welcome page to point to the new Web Access Alias. It does this whether you actually change
the alias or not. It does not delete the old link when it adds the new one. Each Web Access link in the
iFolder Links area of the Welcome page is indistinguishable by its link name alone.
After you finish reconfiguring Web Access, you must manually remove the old URL from the
WebLink section in the
/var/opt/novell/tomcat4/webapps/welcome/WEB-INF/
XMLData/ifolder3.xml file.
Install Settings Description
Web Access Alias The user-friendly path for accessing iFolder services on the specified
iFolder 3 enterprise server.
For example:
/ifolder
iFolder Server URL The iFolder 3 Web Access server and the iFolder 3 enterprise server can
reside on the same computer or on different computers. Specify the URL
and port number of the iFolder 3 enterprise server served by this instance
of Web Access.
Make sure to specify secure HTTP (
https://
) in the URL for secure
communications between the enterprise server and the Web Access
server. HTTPS (SSL) encrypts information transmitted over shared IP
networks and the Internet. It helps protect your sensitive information from
data interception or tampering.
By default, the iFolder enterprise server is configured to communicate
with the iFolder Web Access server via SSL (HTTPS). For most
deployments, this setting should not be changed. If the iFolder
deployment is small so that you can install both the Web Access server
and the iFolder enterprise server on the same machine, you can
optionally specify HTTP (
http:// ) to use clear traffic, which would
increase the performance of local communications between the two
servers.
For example, use
https://192.168.1.1:443
(different servers) or
http://localhost:80
(same server).