Novell DATA SYNCHRONIZER - 07-2010, Руководство по установке

Страница: 28 / 36

28 Novell Data Synchronizer Mobility Pack Installation Guide
n
ov
do
cx (e
n)
16
Ap
ril 20
10
2.2.4 Checking the Status of the Connectors
The Mobility Pack Installation program starts the GroupWise Connector and the Mobility
Connector for you. Use Synchronizer Web Admin to check connector status.
1 In a Web browser, display Synchronizer Web Admin:
https:// data_synchronizer_server :8120
where
data_synchronizer_server
is the IP address or DNS hostname of the server where
you installed the Mobility Pack.
2 Log in as the Synchronizer administrator that you set up during installation.
If the installation proceeded normally, the GroupWise Connector and the Mobility Connector
should be running.
3 (Conditional) If one or both connectors are not yet running:
3a
Start the GroupWise Connector first.
3b Start the Mobility Connector second.
3c
(Conditional) If you encounter problems starting the connectors, see Appendix A,
“Mobility Pack Troubleshooting,” on page 35
2.2.5 Managing Initial Device Synchronization
IMPORTANT: If users’ LDAP usernames are not the same as their GroupWise user IDs, you must
update their application names in Synchronizer Web Admin before initial device synchronization
can succeed. For instructions, see “
Changing a User’s Application Name ” in “ Managing
Connectors ” in the Novell Data Synchronizer Administration Guide .
Initial device synchronization provides the following synchronization of GroupWise items:
Š
Contacts from all personal address books, including the Frequent Contacts address book. You
can change this personal address book selection setting after installation in Synchronizer Web
Admin, as described in “
Customizing a User’s Synchronization Settings ” in “ Managing
Connectors ” in the Novell Data Synchronizer Administration Guide .
Š
Calendar items (appointments, tasks, notes) from the last two weeks and all future items.