Novell DATA SYNCHRONIZER - 07-2010, Руководство по установке

Страница: 15 / 36

Mobility Pack Installation
2
15
n
ov
do
cx (e
n)
16
Ap
ril 20
10
2
Mobility Pack Installation
The Novell Data Synchronizer Mobility Pack Installation program available in YaST helps you
install Data Synchronizer, the GroupWise Connector, and the Mobility Connector to set up your
initial Synchronizer system.
Š
Section 2.1, “Planning a Data Synchronizer System,” on page 15
Š
Section 2.2, “Setting Up Your Data Synchronizer System,” on page 23
2.1 Planning a Data Synchronizer System
You can use the “Mobility Pack Installation Summary Sheet” on page 33 to gather the information
you need so that you are prepared to provide the information requested by the Mobility Pack
Installation program. The Summary Sheet organizes the information in the order in which you need
it during the installation and configuration process.
Š
Section 2.1.1, “Planning Your Data Synchronizer System Configuration,” on page 15
Š Section 2.1.2, “Gathering LDAP Information,” on page 15
Š
Section 2.1.3, “Planning How to Add Users,” on page 17
Š Section 2.1.4, “Gathering GroupWise System Information,” on page 19
Š
Section 2.1.5, “Gathering Mobile Device Information,” on page 21
Š Section 2.1.6, “Planning the Data Synchronizer Database,” on page 23
Š
Section 2.1.7, “Establishing Data Synchronizer System Security,” on page 23
2.1.1 Planning Your Data Synchronizer System Configuration
A Synchronizer system can consist of a single Synchronizer server or multiple Synchronizer servers.
A single Synchronizer server can handle approximately 200 to 300 users, depending on the amount
of synchronization traffic generated by those users. For planning guidelines, review
Section 1.1.3,
“Data Synchronizer Configurations,” on page 12 .
If you plan to install the Mobility Pack on multiple servers, you can proceed through the following
planning sections server by server, or you can apply each planning section to all planned servers,
then proceed to the next planning section.
2.1.2 Gathering LDAP Information
The Data Synchronizer Mobility Pack Installation program needs access to an LDAP directory in
order to add users and groups to your Synchronizer system.
Š “LDAP Server Network Information” on page 16
DATA SYNCHRONIZER MOBILITY PACK INSTALLATION SUMMARY SHEET
Print one or more copies of the Mobility Pack Installation Summary Sheet , one for each Synchronizer
server that you are planning for your Synchronizer system.