JAR BLENDER USE
1. Put the motor base on flat & dry platform. Make sure the electricity power match with the
details given on the rating label of the blender and switch is off before connecting to the
power.
2. Wash the blender jar and make sure the blender jar is clean inside. Cut the fruit into the
cube blocks 15*15*15mm (maximum size). Put these cube blocks into the blender jar and
add proper water in it. Then fit the lid into the blender jar and screw firmly. Note that the
water amount should not exceed the maximum capacity of the bottle.
3. Put the blender jar on the motor base, screw the blender jar counterclockwise into the
motor base and make sure the gear under the blender jar fix rightly to the transmission
gear on the motor base. If the blender jar is not installed on the motor base properly, the
blender won’t operate. This is a safety feature.
4. DO NOT remove the lid or put your fingers into the blender jar while the blender is
working.
15
