NOVEEN X-LINE UH 1800, Дополнительные инструкции безопасности и эксплуатации

Страница: 17 / 21

Operation steps:
Take the water tank out of the unit, open the water tank cover and fill the tank with clear
water. Close the cover and put the tank onto the base carefully. Put the nozzle into the
socket on top of the water tank. Connect the power supply, switch on the unit (NEVER
RUN THE UNIT WHEN THERE IS NO WATER IN WATER BASIN). The unit will begin
working.
Filling the tank:
To fill the tank with water turn the device off. Pull out the tank, using handle, turn over
bottom up, unscrew the filter plug (Fig. 1). Pour water in the place where the filter is placed
in the tank. Close the plug, put the tank on the device, secure the tank (Fig.1)
- device is ready for use.
Fig. 1
TECHNICAL DATA
Power supply: 220-240V 50/60Hz
Heating power: 80 W
Humidify power: 30 W
Total power: 110 W
Water tank capacity: 5 L
Evaporation Rate: ≥300ml/H
Noise level: ≤35dB(A)
*Maintenance:
In a case the water is hard which means water contains too much calcium and
magnesium, it can cause a “white powder” problem and leave heavy scales on the surface
of water basin, transducer, and inner surface of the water tank. Scales on the surface of
transducer will unable the unit to work properly.
17