NOVEEN X-LINE UH 1800, Дополнительные инструкции безопасности и эксплуатации

Страница: 16 / 21

9. Timer setting: There are 12 timer setting: 1,2,3,4,5,6,7,8,9,10,11,12 hours. Touch
the TIMER symbol , the LED display will show the desired setting timer. The
timer shows the rest operation time and decreases by 1 hours, i.e., if the timer is
set at 12 hours, LED display shows 11 after one hour. To know what time have
been set, just to touch TIMER symbol. Touch till “Co” display on the LED, timer
setting is cancelled.
10. Touch the PLASMA symbol , the Plasma generator works. On the LED display,
it shows the PLASMA symbol. Touch again to stop the function.
11. Press and hold the PLASMA symbol to control switching on or off tank lighting.
12. Constant humidity: Before you touch the HUMIDITY symbol , LED display
shows the current humidity. You may set the humidity arranged from 25% RH to
75% RH. Touch once, %RH will increase by 5% RH. When it reaches 75% RH,
touch again, it will show “Co” and flash for 3 seconds to exit humidity setting
function. After you set the expected humidity, the machine will keep the memory
and confirm after 5 seconds. 5 seconds later, LED display shows the current
humidity. Touch again, it shows the expected humidity setting. If the expected
humidity is less than the current humidity, the machine will be in sleeping state. But
if the expected humidity is higher than the current humidity, the humidify function
will work.
13. Auto Shut-Off: Once the water in the tank is too little to keep the machine working,
the machine will automatically stop working. LED shows "NO WATER". Refill the
water, and the machine will restart. If don’t refill water within 15 minutes, the
machine will automatically power off.
14. In any working mode, when the environment humidity reaches 90%, the machine
will be in sleeping state. When the environment humidity is under 85%, the
machine will work again.
15. In any working mode, if no any operation in about 15 seconds, the display will turn
dim.
16