Rev - 3.0
TEMPLATE MODE (TEMPLATE COMMON EDIT)
Pressing the TEMPLATE button activates the Template Common edit mode, in which the universal settings across
all controls within a Template can be modified. Press the scroll up/down buttons to move to additional pages and
modify settings using the same means listed above.
The SL has been expanded to allow for further User options with regards to override MIDI channel settings and
routing. There are now two (universal) options for each control (in addition to the full range of individual options):
COMMON and KEYBOARD. Any control now has the option of using the COMMON or KEYBOARD MIDI channel
and the COMMON or KEYBOARD routing setting. Within each factory Template, controls can be set to COMMON
or KEYBOARD, as well as assigned an individual MIDI channel or routing option, to allow for quick changes to
multiple controls simultaneously. The COMMON and KEYBOARD MIDI channel and routing can be set within the
pages in this (TEMPLATE) Mode. (See User Guide for full details.)
GLOBAL MODE (GLOBAL EDIT)
Pressing the GLOBAL button repeatedly alternates between two different sets of ‘Global’ edit Menu pages. The
first is the set of ‘General Parameters’ pages, where the main ReMOTE SL settings such as Memory protect, port
routing and display timeout can be defined. The second is the set of ‘Keyboard Zones’ pages, where the settings
of up to 4 keyboard zones can be defined. Press the scroll up/down buttons to move to additional pages and
modify settings using the same means listed above.
The facility to update the Operating System and receive/dump Templates is found within the ‘General parameters’
pages in GLOBAL Mode. Press the GLOBAL button followed by the scroll up button (repeatedly) to the left of the
left LCD screen to access.
To adjust the contrast of the screens, press the GLOBAL button once and then use the first or last encoder or
pot to set the left and right screen value, respectively, between 0 and 15. The GLOBAL memory protect must be
off to save this setting. Press the left scroll up button (next to the left screen) once, then use the first encoder/
pot/button to set memory protect to OFF. Once this is done, the WRITE button can be used to save GLOBAL settings.
BUTTONS
INCREASE X
LCD SCREEN
X
ENCODERS
BUTTONS
POTS
DECREASE X
CONTROLS THAT EFFECT X
INCREASE X/
DECREASE X
INCREASE X/
DECREASE X
Press the scroll up/down keys to the left of the screen to move to the additional edit page(s) for each control.
The DATA/TEMPO encoder is inactive in this mode.
5
Содержание Remote 25SL
Страница 1: ...Rev 3 0 ...
