Novation Nocturn 25, Руководство пользователя

Страница: 6 / 10

6
aUtomap oVERVIEW
There is a dedicated Automap user guide which explains the setup and usage of Automap in detail. The following
information is intended to be a brief overview.
Automap software ‘sits’ between the Nocturn Keyboard and your DAW software. It allows direct control of AU, VST, RTAS
and TDM plug-in parameters, as well as a control of supported DAW mixers, and also MIDI CC control of software.
Data from the Nocturn Keyboard is sent to the computer via the USB cable in two separate ‘Ports’.
Keyboard Note data is sent directly from the Nocturn Keyboard to the input of a MIDI / software instrument channel via
the Nocturn Keyboard Port. This will appear in your DAW software with the name ‘Nocturn Keyboard’ (or similar depending
on the computer OS).
Control data is sent from the Nocturn Keyboard to the Automap Software via a hidden Automap Port. Automap Software
directly controls FX and Instrument plug-in parameters, DAW Mixer control and DAW Transport control. Data is sent back
from the Automap Server to the Nocturn Keyboard, updating the LED rings and button LEDs.
aUtomap hUD - hEaDS Up DISplay
When you open your DAW software, the Automap software will automatically open.You will be presented with the Automap
startup page:
All of the options presented here are covered in the Automap Guide, however there are settings specific to the Nocturn
keyboard in the Devices section.
Nocturn
Keyboard
Port
MIDI/Instrument Track
DAW Mixer
Plug-in
Automap Port