Novation Nocturn 25, Руководство пользователя, Страница: 5 / 10

5
REaR panEl
1) Power switch: Use to switch the Nocturn Keyboard on or off.
2) USB in socket: Use to connect the Nocturn Keyboard to your computer with the included USB cable.
3) Sustain pedal socket: Use to connect a sustain pedal. Any polarity pedal can be used.
4) Expression pedal Socket: Use to connect an expression pedal. Note that a 3 pin jack connector must be used.
InStallatIon
The Nocturn Keyboard should be installed onto your computer using the Automap software installer. This is found on the
installation CD or can be downloaded from www.novationmusic.com/support.
Full software installation instructions can be found in the Automap Guide (also on the installer CD or available from the
above website address)
ConnECtIon to CompUtER
The Nocturn Keyboard is a class compliant device, meaning that it can be connected to a computer without the need to
install any driver software. However, as Automap software is an integral part of controlling software with the Nocturn
Keyboard, we recommend that the software is installed BEFORE connecting the keyboard to the computer.
To connect the Nocturn Keyboard to your computer, simply use the supplied USB cable to connect the USB port on the
back panel of the Keyboard to a USB port on your computer.
FA0327-02
Nocturn 25 screen print illustration
5 6 7 8
fx user inst mixer
1
2 3 4
learn view
page page
1
2 3 4
USB