Novation Circuit Mono Station, Руководство пользователя

Страница: 51 / 93

51
English
To select a different Pattern for any Track, simply press its pad. You can do this in Stop or
Play Modes; an important feature of the pattern sequencing is that if you select a Pattern while
another is already playing, the first will play to the end of the Pattern before the new Pattern
starts playing. This gives you a smooth transition between patterns. In this case, the pad for the
newly selected track will flash quickly while it is being “cued”, until it starts to play.
The currently selected Pattern is the one used in both Play and Record Modes: this makes
operation very simple and transparent. The current contents of the selected Pattern (if any) will
play when you press Play , and if you add extra notes in Record or Live Record Modes, they will
be saved to the same Pattern.
Every time you press Play , the Pattern restarts from Step 1 (or the last Step in the Pattern
if Backwards direction is selected in
Pattern Settings View
). You can restart the Pattern from the
point at which the sequencer was stopped by pressing Shift and Play together.
Circuit Mono Station also offers Instant Pattern Switching. While in Play mode, if you hold
down Shift
15
while selecting a Pattern, the new Pattern will begin to play immediately instead
of waiting for the current Pattern to complete. The new Pattern will begin at Step 1 regardless
of where the play cursor was in the previous Pattern and will play its first Step with the same
timing as previously: Pattern tempo is always maintained.
If your Pattern has slipped out of time due to the introduction of odd Pattern
lengths and/or unusual sync rates, Instant Pattern Switching is a quick way of
getting back in time.
Clearing Patterns
Pattern memories may be cleared in
Patterns View
by holding down Clear
13
and pressing the
pad for the Pattern to be cleared. Both Clear and the pad itself will light bright red while you
press them to confirm deletion.