Novatel SA2100X-UG001 Скачать руководство пользователя | Manualshive

Страница: 60 / 106

background image

SIM PIN Lock feature

The field indicates whether or not the PIN lock feature is in use. If "On", the PIN lock has been turned on,
and the SIM PIN must be entered in order to connect to the mobile network. If "Off", the PIN lock
feature is not turned on, and the SIM PIN is not required.

Current SIM status

The field indicates the current status of the SIM card. Possible values are:

l

Ready - this is the normal state. The SIM PIN is not used.

l

PIN Locked - the SIM PIN must be entered before you can use the mobile network.

l

PUK Locked - the PUK for the SIM must be entered in order to continue. The PUK can be
obtained from your service provider.

l

Unlocked - the SIM PIN is needed, but has already been entered.

l

No SIM - no SIM was detected. If you do have a SIM, check that it is inserted correctly.

l

Invalid SIM - a SIM was detected, but it is not usable in this device.

l

SIM Error - a SIM was detected, but it did not respond as expected, and cannot be used.

Desired Action

The actions available depend on the current SIM status. If multiple operations are possible, a "Desired
action" select list is visible. Use this to choose the desired operation.

PIN Lock

WARNING!

If the SIM is currently PIN locked, you are prompted to enter the PIN. Note that if an

incorrect PIN is entered too many times, the SIM becomes PUK locked. An on-page counter
indicates how many incorrect entries will cause PUK lock. Once PUK locked, the PUK must then be
obtained from your service provider.

PUK Lock

WARNING!

If the SIM is currently PUK locked, the only operation possible is to enter the PUK. Note

that if an incorrect PUK is entered too many times, the SIM becomes permanently unusable. An on-
page counter indicates how many entry attempts remain.

Enable PIN Lock

This sets the SIM so that entry of a PIN is required upon startup to connect to the mobile network. To
perform this operation, you must enter the current PIN.

SA 2100 User Guide

56

«
...
58
59
60
61
62
...
»

Содержание SA2100X-UG001











































































































Отзывы:

Нет отзывов

Похожие инструкции для SA2100X-UG001

PremierWave 2050

Бренд: Lantronix Страницы: 2

Бренд: Watchguard Страницы: 2

3CRWE915075 - AirConnect 9150 11n 2.4 GHz PoE Access...

Бренд: 3Com Страницы: 83

RBwAPR-2nD&R11e-LR8

Бренд: MikroTik Страницы: 21

Бренд: Skyrc Страницы: 2

Бренд: ZyXEL Communications Страницы: 340

Бренд: NETGEAR Страницы: 2

BLUESOCKET 1930

Бренд: ADTRAN Страницы: 4

Бренд: Billion Страницы: 61

Бренд: LYNKSYS Страницы: 499

Бренд: BT Страницы: 4

Бренд: ART2WAVE Страницы: 12

Бренд: Yunlink Страницы: 27

Бренд: Yunlink Страницы: 33

Бренд: EnGenius Страницы: 55

Бренд: TaoTronics Страницы: 35

Бренд: LG Innotek Страницы: 14

Conduit AP MTCAP LSP3-915-001L

Бренд: Multitech Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды