Novatel SA2100X-UG001 Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 106

Novatel SA2100X-UG001 Скачать руководство пользователя страница 106

SA 2100 User Guide

102

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on the user is encouraged to try
to correct the interference by one or more of the following measures:

l

Reorient or relocate the receiving antenna.

l

Increase the separation between the equipment and receiver.

l

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

l

Consult the dealer or an experienced radio/TV technician for help.

If the FCCID of the module is not visible when installed in the host platform, then a permanently
attached or marked label must be displayed on the host unit referring to the module.

The label should contain wording such as:

Contains FCC ID: MIDCNN0301

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.

ROHS COMPLIANCE

As a part of Enfora’s corporate policy of environmental protection, Novatel Wireless takes every step to
ensure that the Enabler HS 3001 modules are designed and manufactured to comply to the European
Union Directive 2002/95/EC for the Restriction of Hazardous Substances (RoHS).

«
...
104
105
106

Содержание SA2100X-UG001











































































































Отзывы:

Нет отзывов