Novatel SA2100X-UG001 Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 106

Novatel SA2100X-UG001 Скачать руководство пользователя страница 101

General Disclaimer

TERMS OF USE OF NEW MATERIALS - PLEASE READ CAREFULLY

From time to time, Novatel Wireless, in its sole discretion, may make available for download on its
website (www.novatelwireless.com), or may transmit via mail or email, updates or upgrades to, or new
releases of, the firmware, software or documentation for its products (collectively, 'New Materials'). Use
of such New Materials is subject to the terms and conditions set forth below, and may be subject to
additional terms and conditions as set forth in Novatel Wireless's Technical Support Policy (posted on its
website) and/or any written agreement between the user and Novatel Wireless.

All New Materials are provided AS IS.  Novatel Wireless makes no warranty or representation with
respect to the merchantability, suitability, functionality, accuracy or completeness of any such New
Materials.  The user of such New Materials assumes all risk (known or unknown) of such use.  Novatel
Wireless reserves all rights in such New Materials.  The user shall have only a revocable and limited
license to use such New Materials in connection with the products for which they are intended.
Distribution or modification of any New Materials without Novatel Wireless's consent is strictly
prohibited.

IN NO EVENT WILL NOVATEL WIRELESS BE RESPONSIBLE FOR ANY INCIDENTAL, INDIRECT,
CONSEQUENTIAL OR SPECIAL DAMAGES AS A RESULT OF THE USE OF ANY NEW MATERIALS. NOVATEL
WIRELESS'S MAXIMUM LIABILITY FOR ANY CLAIM BASED ON THE NEW MATERIALS SHALL NOT EXCEED
FIFTY U.S. DOLLARS ($50).

Version Verification

Please ensure you have the latest version of this document by downloading it from
www.novatelwireless.com

SA 2100 User Guide

97

«
...
99
100
101
102
103
...
»

Содержание SA2100X-UG001











































































































Отзывы:

Нет отзывов