52
Modem Manager Description — The Advanced Menu
Revision 1.02
90023164
FBLER
This text box displays the rate of data transmission errors from the wireless IP network
to your modem. This value represents a percentage of the data transferred.
RBLER
This text box displays the rate of data transmission errors from your modem to the wire-
less IP network. This value represents a percentage of the data transferred.
Side
This text box shows which side of the wireless IP network is being used or scanned: the
A
side or
B
side.
PL
This text box will display a number between
2
and
7
. These numbers indicate the cur-
rent power level your Minstrel m500 is transmitting at, with
2
being the highest power
level and
7
being the lowest.
SPI
This text box shows the
Service Provider Identifier
for the network the modem is cur-
rently registered to. This number is used globally for each specific network provider.
WASI
This text box displays the unique
Wide Area Service Identifier
of the network that the
modem is connected to. This identifier is used to identify a group of network providers
that have agreed to provide service over a large geographic area.
SPNI
This field shows the
Service Provider Network Identifier
of the network that the modem
is connected to. This is used to identify a specific network region or domain for a ser-
vice provider.
PwrPrd
This text box shows the value that represents the power at which the modem should be
transmitting to the wireless IP network. This value is defined by the wireless IP network.
BattLvl
The value listed in this text box is the current voltage level of the internal Lithium-Ion
battery. This value indicates the amount of charge left in the battery.
The maximum battery voltage is approximately 4.2 V. If the battery voltage is lower
than 3.0 V, the modem will automatically power itself off to maintain the settings in its
internal memory; however, the battery status indicator LED will flash red before this
point.
TEI
This text box indicates the
Temporary Equipment Identifier
that has been assigned to
your modem by the wireless IP network. As you move into different service areas, this
value will change.
RegErr
This text box displays an error code number, ranging from
0
to
7
(the
0
error code rep-
resents no registration error). These errors comply with the CDPD error code stan-
dards.
Link
This text box indicates the current status of communications with the wireless IP net-
work. It will display the word
Locked
when the modem has synchronized to a channel
and completed its registration. The word
Searching
will be displayed if the modem is
continuing to search for the wireless IP network in the area.
IP
This text box displays the IP address for your Minstrel m500 modem.
EID
This text box displays the
Equipment Identifier
(EID) of your modem. The EID is a
unique number assigned to your modem by the manufacturer.
Status Label
Label Description
Содержание Minstrel m500
Страница 6: ...iv Contents Revision 1 02 90023164...
Страница 72: ...66 Index Revision 1 02 90023164...
